These bushing come in pairs, and include the metal sleeve that slides over the end of the shock shaft. Our hardened rubber bushings are used in our machined aluminum street top mounts. If your bushings have cracked or have been damaged for any reason then replace them with these.
*NOTE* The bushings even though they come in a pair are not the same size. One is taller than the other. The taller bushing goes on the bottom of our aluminum street top mounts, while the shorter one goes on the top. Be sure to make sure you have a washer on the bottom, and the top of the bushing once installed. If you would like to purchase the required washers, and/or the nylon locking nut they are listed below.